K oil GT

Class 6 condensing base-plate heating unit - steel body and pre-calibrated and pre-assembled blown oil burner - heating only (gas version available)

Output: 28 kW

  • Condensing gas oil heating unit with A ERP certification
  • Heating capacity (firebox) max. between 30 and 34 kW
  • Efficiency at Pn max with temperature 80°/60°C of 97,4 %.
  • Useful efficiency at Pn max with temperature 50°/30°C of 104%.
  • Useful efficiency at 30% Pn max with temperature 80°/60°C of 103,9%.
  • Smoke temperature between 40°C and 70°C depending on return temperature
  • Heat exchange surfaces in contact with combustion products, condensing part, in stainless steel AISI 316L
  • Carbon steel surface in contact with the heat transfer fluid ( shell plating)
  • High volume of countercurrent water between smoke duct and water: internal "8" structure, maximum exploitation of condensation phenomenon
  • No limit on return temperature
  • Horizontal cylindrical passing flame firebox
  • Triangular section multiplatform with mechanical anti-stress strain strain relief baffles welded on the firebox shell ring with differentiated exchange, which make up the second flue gas flow
  • Third flue gas flow with patented finned tubes inclined at 10° for condensate drainage
  • Special Nanotec treatment for protection against aggressive thermochemical combustion agents
    oil burner with low-emission combustion in accordance with EN 267, provision for watertight intake
  • Safety tube arrangement
  • Probe shafts and regulations in accordance with the law
  • Plant discharge
  • Complete with rear smoke chamber in stainless steel aisi 304 with condensate drainage connection
  • Safety thermostat with automatic reset which operates at 100°C
  • Smoke evacuation safety with smoke thermostat
  • Maximum pressure 3 bar
  • Outer shell made of stove stove-enamelled sheet steel panels, assembled with removable snap-in couplings for total access to the boiler with complete opening of both the front door and the combustion chamber.
  • Thermal insulation with a double mat made of high density glass wool 80 mm thick protected by aluminium foil
  • Easily operated "Basic" control panel
  • Lifting hooks for transport and handling

 

Optional:

- Acidic condensate neutralizers specific for gas oil and LPG


‹ return to previous page