Gasification wood fired boiler with reversed flame, with optimized control through Lambda Modul System
Output: 34 kW
- Improved management of the combustion and maintenance of the embers bed
- Operation through microprocessor with modulation of the power, supplied according to the C.H. flow temperature
- Delivery of the thermal power according to the real energetic need of the installation, with modulation range from 50 to 100%
- Capaciity of the wood store 100 liters
- Suitable fuels: seasoned firewood in logs with a max. humidity of 25%, length 50-55 cm and thickness 8-12 cm.
- Electronic system of control with self-diagnosis of the operation states, back-lighted display with signalling of the anomalies
- Lambda Modul System for monitoring, through a Lambda sensor, the oxygen between 5 and 6% in the combustion gases, for a total control of the combustion and the maximum environment protection.
- Very low polluting emissions;
- Combustion system with primary and secondary air preheating for the best operation efficiency according to the used woody essences.
- Optimization of the gasification and the combustion efficiency up to 90%,
- Adjustment of the primary and secondary air through servo assisted butterfly valves with anti-return system, set in correspondence of the air suction.
- Integral safety heat exchanger for overheating prevention.
- Modulating fan positioned on the smoke outlet, adjustable on 3 different positions: Vertical - Horizontal to the RH side - and at 45° in between the a.m. two.
- Combustion head and central rod in thermal steel AISI 310 S
- Misaligned, reversed flame combustion chamber
- Internal rear wall in very thick refractory material to avoid the formation of condensates
- Removable shell-shaped catalyst in high-density refractory stone
- Ten primary air nozzles, 4 mm thick, passing in the water for air preheating
- Vertical smoke pipes with blade turbulators, time operated by rods and levers to increase the efficiency of the boiler (handy extraction of the ashes from the front part).
- Wood store room and combustion chamber doors covered in refractory material and allowing an easy loading of the wood logs because rotating of 180°.
- Automatic smoke sucking bypass activated to the opening of the loading door: it allows easy and comfortable loadings of wood without annoying refluxes of the smokes.
